| 0 Items in cart$0.00 | Checkout Now |
About Us |
Our Blog |
Agency Sales
| FREE 2nd Day Shipping - Orders $499+ | 100% Best Deal Assurance! |
Questions? Call Us 800-771-6845
Night Vision Scopes»Day-Night Scopes»Gen 2 Day-Night Scopes»ATN PS22-HPT Gen 2+ Day-Night Scope
ATN PS22-HPT Gen 2+ Day-Night Scope
Product ID: NVDNPS22H0
List Price: $3,499.00
Price: $3,399.00
You Save: $100.00
Free 2nd Day Shipping!
 |
 |
Our ATN PS22-HPT Gen 2+ Day-Night Scope
Image Intensifier Tube Type: High Performance Generation 2
Image Tube Summary: A High Performance Generation 2 Image Tube is the best Gen 2 image tube available. It gives vastly superior performance than the lessor Gen 2 CGT or Gen 2+ image tubes. The performance is very close to Gen 3, however the image tube life is usually quite a bit shorter than a Generation 3 image tube so when available in a similar price range we usually recommend going with the Gen 3 unit.
Product Info:
The ATN PS22-HPT is an attachment for a Daytime Riflescope with 1x Magnification that converts the Scope into a high-quality very accurate Night Vision Weapon Sight.
The ATN PS22-HPT mounts in front of a Daytime Scope. Re-zeroing of the scope is not required. The ATN PS22-HPT comes standard with 7/8" weaver mount. There is also Adapter for ARMS quick release mount, optional Ring Adapters allows to mount unit onto the objective of the Day Scope (25...62mm diameter). The IR Illuminator can be mounted onto the optional Picatinny Rail.
The ATN PS22 Scope utilizes a 2nd+ Gen. or 3rd Gen. Image Intensifier Tube. This ingenious setup allows the shooter to go from day to night in less then 30 seconds without tools, without changes in eye relief and remain zeroed all around the clock.
The ATN PS22-HPT is a complex optical-electronic system. The Night Vision Device contains an Image Intensifier Tube assembly with an integrated high voltage power source and the three volt battery housing.
Included items:
**Export of most Night Vision and Thermal Imaging equipment and accessories is strictly regulated by the US Department of State in accordance with the International Traffic in Arms Regulations (ITAR). By adding to cart or ordering by phone you acknowledge, understand, and agree to our Export Policy. You attest that you are a U.S. person and do not intend to export this product.
Image Intensifier Tube Type: High Performance Generation 2
Image Tube Summary: A High Performance Generation 2 Image Tube is the best Gen 2 image tube available. It gives vastly superior performance than the lessor Gen 2 CGT or Gen 2+ image tubes. The performance is very close to Gen 3, however the image tube life is usually quite a bit shorter than a Generation 3 image tube so when available in a similar price range we usually recommend going with the Gen 3 unit.
Product Info:
The ATN PS22-HPT is an attachment for a Daytime Riflescope with 1x Magnification that converts the Scope into a high-quality very accurate Night Vision Weapon Sight.
The ATN PS22-HPT mounts in front of a Daytime Scope. Re-zeroing of the scope is not required. The ATN PS22-HPT comes standard with 7/8" weaver mount. There is also Adapter for ARMS quick release mount, optional Ring Adapters allows to mount unit onto the objective of the Day Scope (25...62mm diameter). The IR Illuminator can be mounted onto the optional Picatinny Rail.
The ATN PS22 Scope utilizes a 2nd+ Gen. or 3rd Gen. Image Intensifier Tube. This ingenious setup allows the shooter to go from day to night in less then 30 seconds without tools, without changes in eye relief and remain zeroed all around the clock.
The ATN PS22-HPT is a complex optical-electronic system. The Night Vision Device contains an Image Intensifier Tube assembly with an integrated high voltage power source and the three volt battery housing.
Included items:
- Instruction Manual
- Lens Tissue
- Packing Box
- Warranty Card
- Mil-Spec Hard Case
- Two Lithium Batteries
- IR450-B4
- Quick Release Mount
- Remote Control Unit
- Lens Cap
- Back Cup
- Picatinny Rail
- Light Supressor for the scopes with 42-63 mm lens diameter
- Light Supressor for the scopes with 30-42 mm lens diameter
- Light Supressor for Trijicon ACOG scopes
**Export of most Night Vision and Thermal Imaging equipment and accessories is strictly regulated by the US Department of State in accordance with the International Traffic in Arms Regulations (ITAR). By adding to cart or ordering by phone you acknowledge, understand, and agree to our Export Policy. You attest that you are a U.S. person and do not intend to export this product.
| Generation: | Gen 2+ |
| Image Tube Type: | Gen 2+ High Performance |
| Image Tube Data Sheet Included: | No |
| Dimensions: | 5.9 x 3.2 x 2.8 inches |
| Weight Ounces: | 22.4 ounces |
| FOV @1000 yards: | 13* |
| Magnification: | 1x |
| Battery Type-Life: | CR123A /60 hours |
| Lens Type: | 80mm f1.44 |
| Resolution: | 54 to 72 lp/mm |
| Reticle Type: | N/A |
| Windage & Elevation Adjustment : | N/A |
| Range of Focus: | 32.8' to infinity |
| Ir Illuminator: | Detachable IR450 mW |
| Environmental Rating: | Waterproof |
| Diopter Ajustment: | N/A |
| Operating Temperature: | -40 to 122 * F |
| Warranty: | 2 Years |
- Easily changes daytime scope to Night Vision
- Mounts in front of the daytime scope, no re-zeroing required
- Fast catadioptic front lens system
- Multi-coated all-glass optics
- Large 21 mm output window
- Lightweight and rugged
- Comes with Quick Release Mount (on and off in seconds)
- Optional 7/8� weaver mount
- Optional Scope Mounting System attaches the PS22 unit to the objective of the day scope (25...62 mm diameter)
- Automatic brightness control
- Resistance to severe conditions
Be the first to write a review
This product has no customer reviews.
Accessories
|
|
Shop With Confidence
Related Products
|
